13*4mm 1064nmHR 0 Degree Reflective Lens H-K9L For Laser Beauty Machine

Basic Information
Place of Origin: Shaanxi,China(Mainland)
Brand Name: XUCHEN
Certification: CE,ISO9000
Model Number: WM-N-020
Minimum Order Quantity: 10 pcs
Price: USD51/pcs-USD38/pcs
Packaging Details: carton packed
Delivery Time: 8 days
Payment Terms: T/T,payapl
Supply Ability: 1000 pcs per week
Detail Information
Name: 0 Degree Reflective Lens Surface Quality: 40/20
Chamfer: 0.02mm*45 Degree Tolearance: +/-0.1mm
Coating: 1064nmHR Angle Of Incidence: 0 Degree
Substrate Material: H-K9L Glass Polished: Yes
Type: Laser Reflector Mirror Usage: Laser Machine
High Light:

1064nmHR 0 Degree Reflective Lens


13*4mm 0 Degree Reflective Lens


H-K9L 0 Degree Reflective Lens

Product Description

13*4mm 1064nmHR 0 degree Reflective lens H-K9L for laser beauty machine


Products description:


Reflector is an optical element which works by using the law of reflection. According to the shape, the mirror can be divided into three types: plane mirror, spherical mirror and aspheric mirror; According to the degree of reflection, it can be divided into full retroreflector and half transparent semi reflection mirror (also called beam mirror).


In the past, when making mirrors, silver was often coated on glass. The standard process was: after vacuum evaporation of aluminum on highly polished substrate, silicon oxide or magnesium fluoride was coated. In special applications, the loss caused by metal can be replaced by multilayer dielectric film. Because the reflection law is independent of the frequency of light, the frequency band of this element is very wide, and it can reach the UV and infrared areas of visible light spectrum, so it has a wider application range. On the back of the optical glass, a layer of silver (or aluminum) film is coated by vacuum coating to make the incident light reflect the optical element. The output power of the laser can be doubled by using the mirror with high reflection ratio; The first reflection surface reflects the image without distortion and no shadow, which is the reflection effect of the front surface. If the ordinary mirror is used as the second reflector, it is not only low reflectivity, but also has no selectivity for wavelength, and it is easy to produce ghosting. The image obtained by the mirror is not only bright, but also accurate without deviation. The quality of the image is clearer and the color is more realistic. The front surface mirror is widely used for optical high fidelity scanning reflection imaging.



How to clean the reflective lens?


1. Cleaning method: use a soft cotton ball dipped in an appropriate amount of high-purity alcohol to gently wipe the mirror clockwise, with the center to the outside until the mirror is clean

2. If the equipment is not used for a long time, the lens must be cleaned first, and then the surface of the lens must be sealed with high-grade lens paper and adhesive tape to reduce the chance of direct contact between the lens and the air.


Products photo:

13*4mm 1064nmHR 0 Degree Reflective Lens H-K9L For Laser Beauty Machine 0







Contact Details

Phone Number : +8618740495845

WhatsApp : +8618740495845